Bushman Tek Bits Home	BUSHMAN TekBits BTB	Back
	Leatherman Surge Bosch T123X 0.037" Saw Blade 0.033" TShank Spacer BM9030-LSTS03

	Click for Video
	Bosch T123X blades and series are specified for .04" thick but measure at about  .037". Leatherman blades have a thickness of .070". Fastenal Link:  T123X
Adaptor side       .		Rear blade side.
Bosch T123X

Click for Video          Leatherman vs Bosch    wood cutting comparison		Back side was given a sharp "burred" edge for good ferro rod sparking, using a bench grinder.
Bosch catalog gives blade thickness

Bushman TekBits
BM9030-LSTS03

Laser cut from 304 Stainless, ground for about 0.033" thick.
Fits Bosch T123X TShank Saw Blades
and similar at about 0.037" thick.

As noted on UTube Videos, the Bosch TShank series saw blades
fit the Leatherman Surge Saw Blade Adaptor but they are too loose.
A TShank spacer can be used to bring them up to the required .070" thickness.
The Bosch T123X is specified at .040" thickness but obtained samples measure at about 0.037".
The BM9030-LSTS03 has been ground for about 0 .033" thickness, which totals .070".

Check other blade types, to see whether they are about .037" thickness before use.
Other Spacer thickness variations may be available by request.


Standard Disclaimer:
Treat this video and any associated data as intended for entertainment, education and reference only.