BM9026-BDCK


Bushman Tek Bits Home	BUSHMAN TekBits BTB	Back
	Bow Drill Cup Kit for Bow Drill Bearing Block BM9026-BDCK


	Video BM9026-BDCK Assembly Incl Striker & Fidget Spinner
		UPC: 757059142143

	Flanged Sealed Lubricated Ball Bearing is included. The copper cup protects the bearing seal from damage from the Bow Drill spindle.
Kit Contents partially assembled		Kit Contents




	The bearing fits into the copper cap as above. Can be used as a bow drill bearing block in either configuration.



	Bow Drill Cup Kit installed into a Striker BTB Ball Bearing Mount	BM9026-FBRK Flanged Ball Bearing Retainer Kit shown for reference only



	Original Fidget Spinner bearings are not flanged, shielded or lubricated, reducing friction for better spinner performance.


Bearing has a tight friction fit into the Fidget Spinner body.	Unused 608Z Fidget Spinner converted into a useful Bow Drill Ball Bearing Block.

	Flanged bearing can be installed without cup or retainer hardware. Either configuration can be used as a bow drill bearing block.

Bushman TekBits BM9026-BDCK

Bow Drill Spindle Bearing Block Cup Kit
For BTB Flint and Steel strikers, 608 bearing Fidget Spinners
or stand alone.

Fits a Bushman TekBits Flint and Steel Striker "BTB Ball Bearing Mount"
with a flanged or unflanged 608Z ball Bearing Kit.
Provides a bow drill spindle retainer cup for a
frictionless Bow Drill Ball Bearing Block.

Ball bearings have almost no friction compared to the standard divits as provided on some strikers and knives.
Ball bearings don't generate heat in your hand, as standard divits do.

Without the Cup, the bow drill spindle must be tapered to fit
and contact only the ball bearing inner surface.
Pressure or hard rubbing on the bearing seal could damage it.
The Cup provides substantial spindle retainment and protects
the bearing seal from damage while drilling.

Note: Striker, Fidget spinner or bearing retaining hardware not included.
Strikers are hand finished, so will not all look
exactly the same as illustrated.